Research on prediction model of converter temperature and carbon content based on spectral feature extraction
Bo Zhao1, Jinxuan Zhao1, Wei Wu2
1Metallurgical Technology Institute, Central Iron and Steel Research Institute Co. Ltd., Beijing, 100081, People's Republic of China.
Abstract:
The flame of converter mouth can well reflect the change of temperature and composition of molten steel in the furnace. The flame characteristics of converter mouth collected by device can well predict the smelting process of converter. Based on the flame spectrum data set of converter mouth, this paper uses the BEADS algorithm and rough set attribute reduction algorithm optimized by genetic algorithm to extract the features of 2048-dimensional wavelength data. Through the model, eight indexes that contribute greatly to temperature and carbon content are selected, which are f-507, f-520, f-839, f-1073, f-1371, f-1528, f-1727 and f-1826. The MIC coefficients of the eight indicators with temperature and carbon content are calculated, and the MIC coefficients of the variables is small, and the selected indicators are representative. There was a significant correlation between temperature and C content. In BP neural network of temperature prediction model, it is found that the prediction accuracy of the training set is 0.99, the prediction accuracy of the test set is 0.99, the prediction accuracy of the verification set is 0.99, and the prediction accuracy of the whole set is 0.99. Through statistics, it is found that the hit rate of the temperature model in the range of ± 5 K is 88.7%, and the hit rate in the range of ± 10 K is 98.4%. and the RMSE parameter analysis shows that the average prediction error is 3.85 K. In BP neural network of carbon content prediction model, it is found that the prediction accuracy of the training set is 0.99, the prediction accuracy of the test set is 0.99, the prediction accuracy of the verification set is 0.98, and the prediction accuracy of the whole set is 0.99. Through statistics, it is found that the hit rate of the carbon contents model in the range of ± 0.05% is 94.0%, and the hit rate in the range of ± 0.10% is 98.3%, and the RMSE parameter analysis shows that the average prediction error is 0.021%. Finally, the universality of the model is verified by MIV algorithm.
More Related Videos
10:22Split Point Analysis and Uncertainty Quantification of Thermal-Optical Organic/Elemental Carbon Measurements
Published on: September 7, 2019
11:25Identification and Quantification of Decomposition Mechanisms in Lithium-Ion Batteries; Input to Heat Flow Simulation for Modeling Thermal Runaway
Published on: March 7, 2022
Related Concept Videos
Modeling of Diode Forward Characteristics
Modeling of Diode Reverse Characteristics
When a reverse voltage applied to a Zener diode exceeds its breakdown voltage, the diode enters the breakdown region. At this point, the...
Regression Analysis
In regression analysis, a regression equation is determined based on the line of best fit– a line that best fits the data points plotted in a graph. This line is also called the regression line. The algebraic equation for the regression line is called the regression equation. It is represented as:
Heating and Cooling Curves
For instance, the addition of heat raises the temperature of a solid; the amount of heat absorbed depends on the heat capacity of the solid (q = mcsolidΔT). According to thermochemistry, the relation between the amount of heat absorbed or released by a substance, q, and its...
Emission Spectra
Temperature Measurement Sites
Oral: When assessing oral temperature, the thermometer tip should be placed under the tongue in the posterior sublingual pocket. It offers accurate readings and can be...
