Related Experiment Video
Updated: Jul 16, 2025

Fabrication of a Dipole-assisted Solid Phase Extraction Microchip for Trace Metal Analysis in Water Samples
Published on: August 7, 2016
A magnetic solid phase extraction microfluidic chip coupled with gas chromatography-mass spectrometry for the
Yangkun Sun1, Shengli Ruan1, Yuanyuan Zhou1
1Shanghai Key Laboratory of Functional Materials Chemistry, School of Chemistry and Molecular Engineering, East China University of Science and Technology, Shanghai 200237, China.
Abstract:
In this paper, we designed and manufactured a reliable magnetic solid phase extraction (MSPE) microfluidic chip for determination of polycyclic aromatic hydrocarbons (PAHs) in water combined with gas chromatography-mass spectrometry. Sample loading, washing and elution are implemented with microinjection pump and integrated on a single chip, which reduced manual operation. Magnets were used to fix octadecyl/phenyl bifunctional Fe3O4@SiO2 extractant to avoid the design of weir structure in extraction chamber. The whole microfluidic chip was simple and low cost. Based on the microfluidic chip extraction platform, the on-chip MSPE method for the determination of PAHs was optimized and established. The results showed that this method required only 2 mL of sample, 2 mg of extractant, and 50 μL of elution organic solvent for whole on-chip MSPE process, which was environmentally friendly and consistent with green chemistry. Method verification results were displayed which the linear range of five PAHs was between 1-100 ng/mL with good linearity (R2≥ 0.9985), and the detection limits (S/N = 3) were 0.08-0.26 ng/mL. The RSDs of intra-day precision (n=6) and inter-day precision (n=9) for PAHs were less than 6.1 % and 7.2 %, respectively. Enrichment factors were determined to be 31.3-37.7. The recoveries of river water, tap water, bottle water, waste water and urine at three spiked levels were in the range of 89.9% to 113.7% and the matrix effect values were between 83.8% to 109.6%. The extraction platform has the advantages of accurate analysis, simple design and cost-effective, which is conducive to the widespread use of microfluidic chips.
More Related Videos
04:39A Modified QuEChERS-HPLC Method for Detection of Polycyclic Aromatic Hydrocarbons in Zebrafish Embryos Exposed to Fine Particulate Matter
Published on: June 13, 2025
05:31Gas Chromatography-Mass Spectrometry Paired with Total Vaporization Solid-Phase Microextraction as a Forensic Tool
Published on: May 25, 2021
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall....
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a...
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
Mass Spectrometry: Complex Analysis
GC–MS is a powerful hyphenated method commonly used in forensics and environmental...
High-Performance Liquid Chromatography: Types of Detectors