Related Experiment Video
Updated: Jul 9, 2026
Concurrent Quantitative Conductivity and Mechanical Properties Measurements of Organic Photovoltaic Materials using AFM
Published on: January 23, 2013
Estimation of the work of adhesion between ITO and polymer substrates: a surface thermodynamics approach
1Department of Chemical Engineering, Faculty of Engineering and Natural Sciences, Sivas University of Science and Technology, Sivas, Turkey.
Abstract:
Indium tin oxide (ITO) is one of the most widely used semiconductor among transparent conducting oxides (TCOs) due to their electrical conductivity and optical transparency properties. Since the development of low temperature deposition methods, coating of ITO on polymer substrates especially for use in flexible electronics has been a popular topic. The existence of adequate adhesion strength between ITO and polymer is critical in producing a successful film. Nowadays, polycarbonate (PC), poly(methyl methacrylate) (PMMA) and polyethyleneterephtalate (PET) are frequently used as substrates for such coatings. However, there may be other polymeric alternatives that have a potential to be used for this purpose in the future. To evaluate these alternatives, work of adhesion (W) knowledge between ITO and polymers is necessary, and it has not been handled systematically previously. In this study, the interphase interaction parameters and W values between ITO and various polymers were calculated based on the Dupré, Fowkes and Girifalco-Good equations. PC, PMMA, PET, polystyrene (PS), polyphenylene sulfide (PPS), Nylon 66, polypropylene (PP), polyvinylchloride (PVC), styrene-butadiene rubber (SBR), high density polyethylene (HDPE), low density polyethylene (LDPE), polyvinyl acetate (PVAc), polyvinyl fluoride (PVF), polyvinylidene fluoride (PVDF), polytetrafluoroethylene (PTFE), polytrifluoroethylene (PTrFE) and polyperfluoroalkylethyl acrylate (PPFA) were considered as substrate material. Surface free energy (SFE) components calculated by acid-base, geometric mean and harmonic mean approaches for polymeric substrates were used during the calculations. In the present study, the polymers that can be used as substrates were evaluated in terms of adhesion ability to ITO, the significance of calculation methods on W values were also investigated simultaneously. It was determined that the W between ITO and polymer substrates was directly related with the total SFE value of the polymers.
Related Concept Videos
02:57Surface Tension, Capillary Action, and Viscosity
The various IMFs between identical molecules of a substance are examples of cohesive forces. The molecules within a liquid are surrounded by other molecules and are attracted equally in all directions by the cohesive forces within the liquid. However, the molecules on the surface of a liquid are attracted only by about one-half as many molecules. Because of the unbalanced molecular attractions on the surface molecules, liquids contract to form a shape that minimizes the number...
01:16Surface Tension and Surface Energy
Consider a beaker filled with liquid. The bulk molecules in the liquid experience equal attractive forces on all sides with the surrounding molecules. However, the surface molecules experience a net attractive force downward due to the bulk molecules. The surface of the liquid behaves like a stretched membrane,...
01:13Contact Angle
The adhesive force is the molecular force between molecules of different materials, that is, between the molecules of the solid and the liquid. The cohesive force...
01:24Surface Tension
01:29Adsorption Isotherms I
01:25Adsorption Isotherms II