A lateral flow immunoassay method for the rapid detection of acetochlor and alachlor in vegetable oil by sensitivity...

Acetochlor is an endocrine disruptor. The acetochlor residue is strongly lipophilic and can be enriched into products during the manufacturing process. In this study, we found that dimethyl-β-cyclodextrin (DM-β-CD) solution could decrease the apparent oil/water partition coefficient (K_oil-w) of acetochlor and increase the sensitivity of fluorescence lateral flow immunoassay (LFIA) for acetochlor simultaneously. Based on this, a simple LFIA method for the determination of acetochlor and alachlor residues in vegetable oil was established. The detection process only involves vortex mixing of an oil sample and dimethyl-β-cyclodextrin solution in a 1 : 3 (V/V) ratio, loading the water phase onto the immunoassay strips and reading the results. Under optimized conditions, the LOD for acetochlor in oil was 3.53 ng g^-1, and the working range was 12.03-2000.00 ng g^-1. The recoveries of spiked samples ranged from 91.69% ± 1.12% to 112.23% ± 2.20%. Meanwhile, the cross reactivity for alachlor was 108.22%, while for other investigated acetochlor analogues it was less than 1%, and the recoveries of alachlor were from 92.90% ± 8.03% to 113.53% ± 3.40%, which indicate that this method can detect acetochlor and alachlor simultaneously. Compared with the traditional detection method, the pre-treatment process of the proposed method is "green" and simple, and can be applied to the on-site rapid detection of acetochlor and alachlor in vegetable oil and can provide inspiration for the detection of other lipophilic pollutants.