Related Experiment Video
Updated: Jul 15, 2025

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Decarbonatization of Energy Sector by CO2 Sequestration in Waste Incineration Fly Ash and Its Utilization as Raw
Jakub Mokrzycki1, Paweł Baran1, Magdalena Gazda-Grzywacz1
1Department of Coal Chemistry and Environmental Sciences, Faculty of Energy and Fuels, AGH University of Science and Technology, Mickiewicza 30 Av., 30-059 Cracow, Poland.
Abstract:
In this study, municipal solid waste incineration (MSWI) fly ash was subjected to mineral carbonation with the aim of investigating CO2 sequestration in waste material. The conducted study follows the trend of searching for alternatives to natural mineral materials with the ability to sequestrate CO2. The mineral carbonation of MSWI fly ash allowed for the storage of up to 0.25 mmol CO2 g-1. Next, both carbonated and uncarbonated MSWI fly ashes were activated using an alkaline activation method by means of two different activation agents, namely potassium hydroxide and potassium silicate or sodium hydroxide and sodium silicate. Mineral carbonation caused a drop in the compressive strength of alkali-activated materials, probably due to the formation of sodium and/or potassium carbonates. The maximum compressive strength obtained was 3.93 MPa after 28 days for uncarbonated fly ash activated using 8 mol dm-3 KOH and potassium hydroxide (ratio 3:1). The relative ratio of hydroxide:silicate also influenced the mechanical properties of the materials. Both carbonated and uncarbonated fly ashes, as well as their alkali-activated derivatives, were characterized in detail by means of XRD, XRF, and FTIR. Both uncarbonated and carbonated fly ashes were subjected to TG analysis. The obtained results have proved the importance of further research in terms of high-calcium fly ash (HCFA) utilization.
Related Concept Videos
Pozzolans
Fly ash is...
Alkali Aggregate Reaction in Concrete
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
The Carbon Cycle
Portland Cement

