Related Experiment Video
Updated: Jul 15, 2025

Experimental Protocol to Determine the Chloride Threshold Value for Corrosion in Samples Taken from Reinforced Concrete Structures
Published on: August 31, 2017
Fracture Behavior of Concrete under Chlorine Salt Attack Exposed to Freeze-Thaw Cycles Environment
1School of Civil Engineering, Chongqing University, Chongqing 400045, China.
Abstract:
Fracture behavior is one of the key properties to study concrete cracking under sodium chloride attack exposed to the freeze-thaw cycles environment, which is frequently neglected. In this paper, 24 single edge notch beam specimens and 24 cubes were poured. The corresponding freeze-thaw cycles test in sodium chloride solution, standard cube compressive strength of concrete test, and three-point-bending tests were carried out. The research revealed that the fracture toughness, fracture energy, relative dynamic modulus of elasticity, and standard cube compressive strength were decreased by increasing freeze-thaw cycles under sodium chloride attack, and the damage degree of concrete caused by sodium chloride solution was deeper than that of pure water. In particular, there existed good linear correlation between the fracture behavior and imposed freeze-thaw damage for various solution. Accordingly, a more reliable damage model using fracture control parameters as damage factors was proposed.
Related Concept Videos
Frost Action on Concrete
This freeze-thaw cycle primarily causes surface scaling, where...
Sulfate Attack on Concrete
Sulfates from sources like soil, groundwater, or industrial effluents...
Effect of Sea Water on Concrete
Concrete in areas between tide marks,...
Frost Resistant Concrete
Introducing microscopic air bubbles into the concrete mix through air entrainment creates small voids that accommodate ice expansion, thereby reducing internal pressures and preventing cracking. The optimal amount of...
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...
Microcracking in Concrete

