A novel approach for minimising anti-aliasing effects in EEG data acquisition

Electroencephalography (EEG) waves and other biological signals can be deciphered with a deeper understanding of the human body. The benefits of EEG are growing. EEG studies have expanded globally. Research on EEG covers data gathering, analysis, energy renewal, and more. EEG-gathering devices include encoding, digital transfer, head sensor placement, and separate amplifiers. The EEG detects periodic noise. Head movement, sensor lines, and hair sweat produce low-frequency noise. Low-frequency noise alters EEG signals over time. Muscle actions and electromagnetic waves create high-frequency noise (especially in the facial and neck muscles). EEG shifts are saw-toothed by high-frequency noise. High- and low-frequency noises are usually lower and higher than human EEG, respectively. Lowering signal power above and below the testing level without altering the signs of interest lowers noise. Aliasing may affect low-frequency impacts in the original data because high-frequency noise is mirrored in the data. This work designed a non-binary Complementary metal oxide semiconductor (CMOS) Consecutive guesstimate register (CGR) reconfigurable analogue-to-digital converter (ADC) integrated with the instrumental amplifier. CGR ADC model comprises the bio-signal device monitoring for the EEG signals. This study focused on acquiring the EEG signals for amplification. The model uses the AC-coupled chopper stabilisation model with 1 A low power with a noise level of 1 A. The neural amplifier uses an optimised current technique to maximise the transconductance for a good noise efficiency factor. The simulation analysis estimates a bandwidth range of 0.05-120 Hz with a power consumption level of 0.271 µW. The computed noise level is observed as 1.1 µV_rms and a gain of 45 dB. The comparative analysis of the proposed ADC model achieves the minimal energy consumption value of ∼12%, which is minimal than the nonlinear and switch-end capacitor. Also, the time consumed is ∼9% less than the nonlinear and switch-end Capacitor.18 nm CMOS technology is used to implement the proposed data acquisition system for low-power and density-optimised applications.