New Nitinol-based Thermomechanically Adjustable IOL Technology

To evaluate the feasibility of new adjustable intraocular lens (IOL) technology.

The foldable adjustable IOL consists of a nitinol mechanism placed in a haptic-optic cradle. Heating actuators on the nitinol mechanism with a continuous green laser achieve controlled movement of the mechanism and optic. Activation occurs in controlled steps: rotation in 1-degree steps over 360 degrees, and anterior posterior movement in 0.25-diopter (D) steps with a range of +1.50 D. The IOL was tested in vitro and in vivo in a rabbit eye. Foldability and unfolding were demonstrated through a 2.6-mm cartridge.

The adjustable lens mechanism was successfully tested in vitro and in vivo. Activation resulted in a change in optic position relative to the haptics and the capsular bag. Activation of the lever and ratchet mechanism showed radial advancement of the IOL clockwise and counterclockwise. In vivo rotatory movement was achieved after activation by the argon laser at 1 week after implantation. Anterior to posterior movement was accomplished by activating the circular spring actuator mechanism in the laboratory model. Uneventful folding and unfolding were performed.

A new adjustable IOL with a mechanism that responds in measured steps had been shown to move as planned after activation by argon laser. This was successful in the laboratory in both radial and anterior posterior movement. The radial movement was also proven in vivo in an animal model. Further refinement of the prototype is currently being undertaken. [.