Related Experiment Video
Updated: Jul 13, 2025

The Portable Chemical Sterilizer PCS, D-FENS, and D-FEND ALL: Novel Chlorine Dioxide Decontamination Technologies for the Military
Published on: June 29, 2014
A 3D-Printed Portable Sterilizer to Be Used During Surgical Procedures in Spaceflight
Abstract:
INTRODUCTION: During spaceflight, it is important to consider the mechanisms by which surgeries and medical procedures can be safely and efficiently conducted. Instruments used to carry out these processes need to be sterilized. Thus, we have designed and tested a three-dimensional-printed (3D-printed) portable sterilizer that implements far ultraviolet-C (Far UV-C) light radiation to disinfect bacteria and microorganisms from surgical instruments.METHODS: The sterilizer was 3D-printed with polylactic acid filament. Effectiveness was assessed through three trials at differing times of sterilization and compared against a control group of no sterilization and against Clorox wipes. Cultures were incubated on agar dishes and counted with ImageJ.RESULTS: Increasing time under Far UV-C light radiation increased the percentage of sterilization up to 100% at 10 min. The 3D-printed sterilizer was significantly better than Clorox wipes and control.DISCUSSION: As sterilization will be necessary for surgical procedures in microgravity and upmass is a significant concern, we have successfully demonstrated a 3D-printable portable sterilizer for surgical instruments that achieves 100% success in using Far UV-C light to disinfect its surface of bacteria with a 10-min sterilizing time. Further research is necessary to test this design in microgravity and with differently sized and shaped instruments.Kovalski E, Salazar L, Levin D, Kamine TH.
More Related Videos
10:03Investigating the Detrimental Effects of Low Pressure Plasma Sterilization on the Survival of Bacillus subtilis Spores Using Live Cell Microscopy
Published on: November 30, 2017
06:21Design and Development of a Three-Dimensionally Printed Microscope Mask Alignment Adapter for the Fabrication of Multilayer Microfluidic Devices
Published on: January 25, 2021
Related Concept Videos
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Physical Methods for Controlling Microbial Growth: Radiation and Filtration