Fabricable concentric-ring metalens with high focusing efficiency based on two-dimensional subwavelength unit...

To address the challenges posed by computational resource consumption and data volume in the development of large-aperture metalenses, a design method for concentric-ring metalens based on two-dimensional unit splicing is proposed in this paper. In the method, the unit structure library is constructed through global traversal under the machining process constraints. The phase matching is performed for two polarization states with specific weights and the design of binary-height, concentric-ring structures with arbitrary polarization sensitivity is realized, whose focusing efficiency (the encircled power within 3×FWHM of the focal spot divided by the near-field outgoing power) is up to 90%. Based on this method, a polarization-insensitive metalens with a design wavelength of 10µm, diameter of 2 cm, and numerical aperture of 0.447 is obtained. The method combines the advantages of lower computation requirements for a building block array of a metalens and lower structure data for a concentric-ring metalens. Consequently, it becomes possible to reduce calculation and processing costs by several orders of magnitude during the development process of metalenses with diameters ranging from 10³ to 10⁵ wavelengths. The resulting focusing efficiency can approach the upper limit achievable through global structural optimization and significantly surpass that of binary-height Fresnel lenses.