Related Experiment Video
Updated: Jul 12, 2025

Evaluating the Electrochemical Properties of Supercapacitors using the Three-Electrode System
Published on: January 7, 2022
Implantable anti-biofouling biosupercapacitor with high energy performance
Taegyu Park1, Dong Yeop Lee1, Bum Ju Ahn2
1Department of Electronic Engineering, College of Engineering, Hanyang University, Seoul, 04763, South Korea.
Abstract:
Biofluidic open-type supercapacitors offer significant advantages over batteries in implantable electronics. However, poor energy storage in bioelectrolytes and performance degradation owing to electrode biofouling remain challenges and hamper their implementation. In this study, we present a flexible polydopamine (PDA)-infiltrated carbon nanotube (CNT) yarn (PDA/CNT) supercapacitor with high performance in biofluids, encapsulated by a hydrogel-barrier circular knit that provides anti-biofouling protection. Infiltration of the biopolymer PDA provide a hydrophilic coating to obtain a hydrophobic CNT electrode under aqueous conditions and an energy density 250-fold higher than that of the pristine CNT in the biofluid. The PDA/CNT supercapacitor exhibited remarkable energy performance in biological fluids in terms of the maximum areal capacitance (503.91 mF cm-2), energy density (274 μWh/cm2), and power density (25.52 mW cm-2). Moreover, it demonstrated negligible capacitance loss after 10,000 repeated charge/discharge cycles and bending tests. To prevent biofouling, the PDA/CNT electrode was encapsulated in an agarose-coated circular knit that allows free movement of the electrolyte. Notably, implanting an encapsulated PDA/CNT supercapacitor into the abdominal cavity of rat resulted in stable in vivo energy storage performance without biofouling for 21 d, and the charged supercapacitor was used successfully to power a light-emitting diode in vivo.
More Related Videos
08:59Synthesizing a Gel Polymer Electrolyte for Supercapacitors, Assembling a Supercapacitor Using a Coin Cell, and Measuring Gel Electrolyte Performance
Published on: November 30, 2022
10:57Elaborate Control of Inkjet Printer for Fabrication of Chip-based Supercapacitors
Published on: November 30, 2021
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Energy Stored in a Capacitor
Capacitor With A Dielectric
Dielectrics are non-conducting materials with no free or loosely bound electrons. When a dielectric is...
Energy Stored in a Capacitor: Problem Solving
Capacitor-discharge ignition is a type of ignition system commonly found in small engines where the energy released from a capacitor ignites an induction coil that, in turn, fires the spark plug.
To calculate the energy stored in a capacitor of...
Energy Stored in Capacitors
By integrating the equation that relates voltage and current in a capacitor, one can derive an equation for the voltage across the capacitor at any given time. This equation is crucial in understanding and predicting the behavior of capacitors in...
Capacitors and Capacitance
When the conductors are two identical parallel plates, it is called a parallel plate capacitor. When battery terminals are...