Enlarging the thermal coagulation volume during thermochemical ablation with alternating acid-base injection by

Nguoy L Mak1, Wen H Ng1, Ean H Ooi1

  • 1Department of Mechanical Engineering, School of Engineering, Monash University Malaysia, Jalan Lagoon Selatan, 47500 Bandar Sunway, Selangor, Malaysia.

Abstract

Related Concept Videos

Recrystallization: Solid–Solution Equilibria01:10

Recrystallization: Solid–Solution Equilibria

Recrystallization is a purification technique used to separate impurities from solid compounds. In this technique, no chemical reactions occur. Instead, it exploits physical properties only, specifically, the solubility differences between the desired compound and impurities, either at a single temperature or at different temperatures, and under other selected conditions. The solid-solution equilibrium (solubility equilibrium) of each component in the solution represents a binary phase...
α-Hydroxy Ketones via Reductive Coupling of Esters: Acyloin Condensation Overview01:19

α-Hydroxy Ketones via Reductive Coupling of Esters: Acyloin Condensation Overview

The pinacol and McMurry reactions involve the reductive coupling of ketones or aldehydes. Similarly, the bimolecular reductive coupling of two ester molecules in the presence of sodium metal in an aprotic solvent yields an α-hydroxy ketone product. The α-hydroxy ketone is also called acyloin, so the reaction is referred to as ‘acyloin condensation.’
Precipitation Processes01:12

Precipitation Processes

The experimental conditions in a gravimetric analysis should be optimized to maximize the particle size and purity of the obtained precipitate. Ideally, the concentration of the precipitating reagent should be low with effective stirring to maintain low relative supersaturation for the growth of large crystals. In homogeneous precipitation, the precipitant is slowly generated by a chemical reaction in the solution to avoid local reagent excesses. For example, urea decomposes gradually to...
Colloidal precipitates01:09

Colloidal precipitates

The high insolubility of some precipitates can result in an unfavorable relative supersaturation. This can lead to colloidal particles with a large surface-to-mass ratio, where adsorption is promoted. For instance, in the precipitation of silver chloride, silver ions are adsorbed on the surface of the colloidal particles, forming a primary layer. This layer attracts ions of opposite charge (such as nitrate ions), forming a diffuse secondary layer of adsorbed ions. This electric double layer...
Fast Reactions01:27

Fast Reactions

Fast reactions occurring in times shorter than the time needed to mix reactants pose a unique challenge for investigation. In a liquid-phase continuous-flow system, reactants A and B are swiftly pushed into the mixing chamber, where mixing occurs within 1 ms. The reaction mixture then flows through an observation tube, and one measures light absorption to determine species concentrations at various points of the tube. This method is most appropriate when relatively large volumes of reactants...
Leveling Effect01:29

Leveling Effect

In acid-base chemistry, the leveling effect refers to the limitation imposed by the solvent on the strength of acids and bases in solution. When a base stronger than the solvent's conjugate base is used, it deprotonates the solvent until the base is entirely consumed, making it ineffective against weaker acids. Conversely, an acid stronger than the solvent's conjugate acid protonates the solvent until the acid is depleted, rendering it ineffective against weaker bases. Essentially, the solvent...