Related Experiment Video
Updated: Jul 12, 2025

Removal of Trace Elements by Cupric Oxide Nanoparticles from Uranium In Situ Recovery Bleed Water and Its Effect on Cell Viability
Published on: June 21, 2015
Study on Cu- and Pb-contaminated loess remediation using electrokinetic technology coupled with biological permeable
Lin Wang1, Wen-Chieh Cheng1, Zhong-Fei Xue1
1School of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an, 710055, China; Shaanxi Key Laboratory of Geotechnical and Underground Space Engineering (XAUAT), Xi'an, 710055, China.
Abstract:
Although the electrokinetic (EK) remediation has drawn great attention because of its good maneuverability, the focusing phenomenon near the cathode and low removal efficiency remain to be addressed. In this study, a novel EK reactor was proposed to remediate Cu and Pb contaminated loess where a biological permeable reactive barrier (bio-PRB) was deployed to the middle of the EK reactor. For comparison, three test configurations, namely, CG, TG-1, and TG-2, were available. CG considered the multiple enzyme-induced carbonate precipitation (EICP) treatments, while TG-1 considered both the multiple EICP treatments and pH regulation. TG-2 further considered NH4+ recovery based on TG-1. CG not only improved Cu and Pb removals by the bio-PRB but also depressed the focusing phenomenon. TG-1 causes more Cu2+ and Pb2+ to migrate toward the bio-PRB and aggravates Cu and Pb removals by the bio-PRB, depressing the focusing phenomenon. TG-2 depressed the focusing phenomenon the most because Cu2+ and Pb2+ can combine with not only CO32- but PO43-. The removal efficiency of Cu and Pb is 34% and 36%, respectively. A NH4+ recovery of about 100% is attained.
Related Concept Videos
Bioremediation
Extraction: Advanced Methods
Coagulation
Controlled-Potential Coulometry: Electrolytic Methods
The chosen potential...
Environmental Applications of Microorganisms

