Self-Assembled Monolayer Doping for MoTe₂ Field-Effect Transistors: Overcoming PN Doping Challenges in Transition...

Transition metal dichalcogenides (TMDs) have gained significant attention as next-generation semiconductor materials that could potentially overcome the integration limits of silicon-based electronic devices. However, a challenge in utilizing TMDs as semiconductors is the lack of an established PN doping method to effectively control their electrical properties, unlike those of silicon-based semiconductors. Conventional PN doping methods, such as ion implantation, can induce lattice damage in TMDs. Thus, chemical doping methods that can control the Schottky barrier while minimizing lattice damage are desirable. Here, we focus on the molybdenum ditelluride (2H-MoTe₂), which has a hexagonal phase and exhibits ambipolar field-effect transistor (FET) properties due to its direct band gap of 1.1 eV, enabling concurrent transport of electrons and holes. We demonstrate the fabrication of p- or n-type unipolar FETs in ambipolar MoTe₂ FETs using self-assembled monolayers (SAMs) as chemical dopants. Specifically, we employ 1H,1H,2H,2H perfluorooctyltriethoxysilane and (3-aminopropyl)triethoxysilane as SAMs for chemical doping. The selective SAMs effectively increase the hole and electron charge transport capabilities in MoTe₂ FETs by 18.4- and 4.6-fold, respectively, due to the dipole effect of the SAMs. Furthermore, the Raman shift of MoTe₂ by SAM coating confirms the successful p- and n-type doping. Finally, we demonstrate the fabrication of complementary inverters using SAMs-doped MoTe₂ FETs, which exhibit clear full-swing capability compared to undoped complementary inverters.