Related Experiment Video
Updated: Jul 12, 2025

Advanced Self-Healing Asphalt Reinforced by Graphene Structures: An Atomistic Insight
Published on: May 31, 2022
Network-level pavement maintenance and rehabilitation decision-making with the optimized annual budget
Lin Chen1,2
1College of Transportation Engineering, Chang'an University, Xi'an, China.
Abstract:
Maintenance and rehabilitation (M&R) is necessary to keep pavement networks in good condition. Due to the capital intensity, M&R funding is always insufficient. The annual budget, determining the available funding, is a critical criterion when planning M&R treatments. However, its values are often given, and the determination of the values is seldom discussed. To fill the gap, this paper focuses on both the determination of annual budgets and the budget allocations, and therefore enhances the network-level decision-making on M&R by developing a Multi-Objective Optimization (MOO) method. This method does not only optimize and trade off the annual budgets and their consequences, but also allocates the funding across the entire network through generating the optimized M&R decisions. According to a case study with 50 segments, the developed method successfully and effectively identified non-linear discrete relationship between the minimized annual budgets and the maximized M&R benefits subject to all the constraints, and generated the optimized annual budget allocation for each M&R decision. The achievements of this paper can be used to enhance the efficiency of M&R decisions and contribute to informed pavement management.
Related Concept Videos
Design Example: Alignment of a Road Line Using GIS
Design Example: Joints in Concrete Pavements
Contraction joints are typically formed by sawing a groove into the concrete shortly after it has hardened. This creates a weakened vertical plane, deliberately encouraging cracking at...
Masonry Paving
Design Example: Maintaining Level of an Embankment
Design Example: Aggregate Gradation
The grading, or particle-size distribution, of sand is determined using sieve analysis, with standard sizes ranging from 150 μm to 10 mm (ASTM No. 100 sieve to 3⁄8 in. sieve). Sand is...
Manipulation and Analysis

