Exploring the Sequential-Selective Supercritical Fluid Extraction (S³FE) of Flavonoids and Esterified Triterpenoids...

One of the many advantages of supercritical fluid extraction (SFE) is the possibility of using it in sequential and selective approaches. This is due to the use of a dynamic extraction mode in addition to the possibility of altering the composition of the modifier during the extraction process. In this study, the optimization of Calendula officinalis L. extraction of non-polar and polar compounds was achieved using three-level Box-Behnken designs (BBD). For non-polar compounds, the factors were pressure, temperature, and EtOH percentage. As for the polar compounds, the three variables were temperature, the total modifier percentage, and H₂O added in the modifier as an additive. The recovery of selectively rich extracts in triterpendiol esters and narcissin was possible using a sequential two-step SFE. The first step was performed at 80 °C and 15% EtOH, and the second at 40 °C and 30% EtOH:H₂O 80:20 v:v with a total of 60 min of extraction. Additionally, the SFE extraction of non-polar compounds was scaled up on a pilot-scale extractor, demonstrating similar results. Finally, the SFE results were compared to ultrasound-assisted extraction (UAE).