A Symmetrized Dot Pattern Extraction Method Based on Frobenius and Nuclear Hybrid Norm Penalized Robust Principal...

Due to their symmetrized dot pattern, rolling bearings are more susceptible to noise than time-frequency characteristics. Therefore, this article proposes a symmetrized dot pattern extraction method based on the Frobenius and nuclear hybrid norm penalized robust principal component analysis (FNHN-RPCA) as well as decomposition and reconstruction. This method focuses on denoising the vibration signal before calculating the symmetric dot pattern. Firstly, the FNHN-RPCA is used to remove the non-correlation between variables to realize the separation of feature information and interference noise. After, the residual interference noise, irrelevant information, and fault features in the separated signal are clearly located in different frequency bands. Then, the ensemble empirical mode decomposition is applied to decompose this information into different intrinsic mode function components, and the improved DPR/KLdiv criterion is used to select components containing fault features for reconstruction. In addition, the symmetrized dot pattern is used to visualize the reconstructed signal. Finally, method validation and comparative analysis are conducted on the CWRU datasets and experimental bench data, respectively. The results show that the improved criteria can accurately complete the screening task, and the proposed method can effectively reduce the impact of strong noise interference on SDPs.