Validated HPLC method for simultaneous quantitative determination of dimethylcurcumin and resveratrol in...

Nano-micelles offer a promising vehicle for the delivery various therapeutically significant biologicals. Development of convenient and efficient chromatographic methods for the quantitative determination of the active pharmaceutical ingredients in such systems is of immense importance. In this study pluronic-F-127 nano-micelles were prepared and loaded with dimethylcurcumin (DMC) and resveratrol (Res). A simple, convenient and effective HPLC method was developed for the quantitative estimation of DMC and Res in the polymeric nano-micelles through a single injection. A reverse-phase ACE® C18 column (250 mm × 4.6 mm) was used with a gradient mobile phase system consisting of 1 % MeOH and 0.1 % H₃PO₄:100 % acetonitrile at 1 mL/min flow rate with UV detection for Res, and fluorescence detector for DMC. The calibration curves generated for both the compounds were found linear with r² values of 1.000 over a concentration range of 2-25 µg/mL with low limit of detection (LOD) values of 0.37 and 0.16 µg/mL for DMC and Res respectively and limit of quantification (LOQ) values of 1.23 and 0.55 µg/mL for DMC and Res respectively. Similarly, accuracy was found in a range of 98.80 -102.47 % for DMC and 100.58-101.77 % for Res. Furthermore, the within-run precisions (%RSD) were 0.073 - 0.444% for DMC and 0.159 - 0.917% for Res, while between-run precisions (%RSD) were 0.344 - 1.47 for DMC and 0.458 - 1.651 for Res. Moreover, the DMC with Res co-loaded nanomicelles showed higher activity against MCF-7 and MDA-MB 231 compared to DMC and Res alone. Overall, this study presented a simple, convenient, precise and accurate method for the quantitative determination of DMC and Res in polymeric nano-micelles which have anticancer potential.•A simple HPLC for the quantitative determination of DMC and Res in nanomicelles having anti-cancer potential.•Non complicate with high degree of recoveries of sample preparation process.•This method can be used to determine a mixture of DMC and Res in pharmaceutical formulation in single injection.