Sensing and Controlling Strategy for Upper Extremity Prosthetics Based on Piezoelectric Micromachined Ultrasound...

Surface electromyography (sEMG) is currently the primary method for user control of prosthetic manipulation. Its inherent limitations of low signal-to-noise ratio, limited specificity and susceptibility to noise, however, hinder successful implementation. Ultrasound provides a possible alternative, but current systems with medical probes are expense, bulky and non-wearable. This work proposes an innovative prosthetic control strategy based on a piezoelectric micromachined ultrasound transducer (PMUT) hardware system. Two PMUT-based probes were developed, comprising a 23×26 PMUT array and encapsulated in Ecoflex material. These compact and wearable probes represent a significant improvement over traditional ultrasound probes as they weigh only 1.8 grams and eliminate the need for ultrasound gel. A preliminary test of the probes was performed in non-disabled subjects performing 12 different hand gestures. The two probes were placed perpendicular to the flexor digitorum superficialis and brachioradialis muscles, respectively, to transmit/receive pulse-echo signals reflecting muscle activities. Hand gesture was correctly predicted 96% of the time with only these two probes. The adoption of the PMUT-based strategy greatly reduced the required number of channels, amount of processing circuit and subsequent analysis. The probes show promise for making prosthesis control more practical and economical.