A white cell based broadband transient UV-vis absorption spectroscopy with pulsed laser photolysis reactors for...

UV-vis spectroscopy is widely used for kinetic studies in physical chemistry, as species' absolute cross-sections are usually less sensitive to experimental conditions (i.e., temperature and pressure). Here, we present the design and characterization of a multipass UV-vis absorption spectroscopy white cell coupled to a pulsed-laser photolysis flow reactor. The glass reactor was designed to facilitate studies of gas phase chemical reactions over a range of conditions (239-293 K and 10-550 Torr). Purged windows mitigate contamination from chemical precursors and photolysis products. We report the measured impact of this purging on temperature uniformity and the absorption length and present some supporting flow calculations. The combined optical setup is unique and enables the photolysis laser to be coaligned with a well-defined absorption pathlength probe beam. This alignment leverages the use of one long-pass filter to increase the spectrum flatness and increase the light intensity vs other systems that use two dichroic mirrors. The probe beam is analyzed with a dual exit spectrograph, customized to split the light between an intensified CCD and photomultiplier tube, enabling simultaneous spectrum and single wavelength detection. This multipass system yields a pathlength of ∼450 cm and minimum observable concentrations of ∼3.7 × 1011 molecule cm-3 (assuming cross-sections ∼1.2 × 10-17 cm2). The temperature profile across the reaction region is ±2 K, defined by the worst-case temperature of 239 K, validated by measurements of the N2O4 equilibrium constant. Finally, the system is implemented to study the simplest Criegee intermediate, demonstrating the instrument performance and advantages of simultaneous spectrum and temporal profile measurements.