Related Experiment Video
Updated: Jul 11, 2025

Preparation of Aligned Steel Fiber Reinforced Cementitious Composite and Its Flexural Behavior
Published on: June 27, 2018
Seismic Behavior of Concrete Columns Reinforced with Weakly Bonded Ultra-High Strength Rebars and Confined by Steel
Jing Luo1, Shiyu Yuan1, Jun Zhao2
1Department of Architecture, Graduate School of Engineering, Kobe University, Kobe 657-8501, Japan.
Abstract:
The usage of weakly bonded ultra-high strength (WBUHS) rebars has emerged as a promising approach to enhance the resilience of concrete components due to their remarkable mechanical properties. To promote the application of WBUHS rebars, this paper presented an investigation on the seismic behavior of circular concrete columns reinforced with squarely arranged WBUHS rebars and externally confined by bolted steel tubes. Eight columns, including two reinforced with normal strength (NS) rebars and six reinforced with WBUHS rebars, were fabricated and tested under reversed cyclic lateral loading. Experimental results showed that the columns reinforced with WBUHS rebars exhibited remarkable drift-hardening capacity up to the drift of at least 5% as well as significantly reduced residual deformation even when subjected to relatively high axial compression with an axial load ratio of 0.33 in comparison to the traditional ductile columns reinforced with NS rebars. Notably, the precast columns reinforced with WBUHS rebars, with an embedment length of 20 times their diameter, behaved nearly identically in terms of resilience as cast-in-place columns. Additionally, a numerical analysis was performed to assess the hysteretic performance, and the analytical results, with consideration for the slippage of WBUHS rebars, were capable of capturing the hysteretic performance of test columns.
More Related Videos
Related Concept Videos
Reinforcements in Concrete
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...
Effects of Creep
Tensile Strength Considerations of Concrete
The dimensions and shape of a concrete specimen...
Design Example: Distributing Reinforcements in Concrete Sections
Relation Between Tensile Strength and Compressive Strength of Concrete

