A LFP/AP Mode Reconfigurable Analog Front-End Combining an Electrical EEEG-iEEG Model for the Closed-Loop VNS

This article presents a local field potential (LFP)/action potential (AP) mode reconfigurable analog front-end (AFE) dedicated for the closed-loop vagus nerve stimulator (VNS). It combines an inverse electrical model of the intracranial electroencephalogram (iEEG) conducting in the brain tissues and been recorded at scalp as the extended electroencephalogram (EEEG). The AFE contains a LFP/AP mode reconfigurable EEEG preamplifier, a tunable integrator to compensate the effect of either the recording electrodes or head tissues, and an adder. The LFP/AP mode reconfigurable EEEG preamplifier consists of a tunable chopper-stabilized amplifier (CSA) and a 2nd-order tunable low pass filter (LPF). For better separation of LFP and AP signals, a high-order DC servo loop (DSL) characterized as a 2nd-order DSL in parallel with a 1st-order DSL is exploited in the tunable CSA to achieve a tunable high-pass frequency with a stopband attenuation slope (SAS) of +40 dB/dec. In addition, the tunable LPF can obtain a tunable low-pass frequency with a SAS of -40 dB/dec and provide additional 20 dB gain for AP signals. Fabricated in a SMIC 180 nm CMOS technology, and in the LFP band (0.5 Hz-200 Hz) and AP band (300 Hz-5 kHz), the measured mid-band gains of the LFP/AP mode reconfigurable EEEG preamplifier are 39.6 dB and 59.5 dB, the input-referred noises (IRNs) are 2.2 μVrms and 6.3 μVrms, the DC/in-band input impedances are 1.27/1.26 GΩ and 0.3/0.22 GΩ, respectively. The power consumption per channel AFE is 6.3 μW, and the die area is 1.4 mm × 0.25 mm.