Polymerized PEI-modified lignin polyphenolic materials by acid hydrolysis-phase separation for removal of Cr (VI) from industrial wastewater

Cr (VI) accumulates in an aqueous environment and exhibits huge harm to human health and the ecological system. Developed lignin biomass materials are complicated to prepare and have limited properties, and advances in lignin phenolic modification are lacking. Herein, an aminated poplar lignin-pyrogallol (PLP-PEI) with a simple design and adjustable phenolic hydroxyl content was developed using the acid hydrolysis-phase separation (AH-PS) method, and modified by the atom transfer radical polymerization (ATRP) strategy. Through diverse characterization analysis, the structural changes of PLP-PEI in the step-by-step synthesis process were monitored. An effective biomass capture system (Bio-Cap) was shown via systematically investigating the adsorption behaviors of Cr (VI) on PLP-PEI under various environmental conditions. Benefiting from introducing phenolic hydroxyl and amino groups, PLP-PEI demonstrated efficient adsorption capacity (598.80 mg/g for Cr (VI)). Additionally, the material also exhibited advantages, including monomeric chemisorption properties, strong reduction capability, and stable regeneration properties. Multiple driving forces were involved in the capture and removal process of Cr (VI), including complexation and electrostatic interaction. The low-cost natural biomass resources supported the industrial-scale synthesis and practical application of advanced aminated lignin polyphenol material, which showed outstanding advantages and enormous potential in the field of water environmental restoration.