Improving the Performance of Polydimethylsiloxane-Based Triboelectric Nanogenerators by Introducing CdS Particles...

Energy harvesting and power generation technologies hold significant potential for meeting future energy demands and improving environmental sustainability. A triboelectric nanogenerator (TENG), which harnesses energy from the surrounding environment, has garnered significant attention as a promising and sustainable power source applicable in various fields. In this study, we present a technique to improve the triboelectric performance of a PDMS-based TENG by incorporating nanostructured cadmium sulfide (N-CdS). This study investigates the utilization of CdS nanomaterials in TENG production, where mechanical energy is converted into electrical energy. We conducted a comparative analysis of TENGs utilizing N-CdS/PDMS, commercial CdS/PDMS (C-CdS/PDMS), and pure PDMS substrates. The N-CdS/PDMS substrates demonstrated superior triboelectric performance compared to TENG devices based on pure PDMS and C-CdS/PDMS. The triboelectric open-circuit voltage (V_oc) and short-circuit current (I_sc) of the N-CdS/PDMS-based TENG device were approximately 236 V and 17.4 µA, respectively, when operated at a 2 Hz frequency. These values were approximately 3 times and 2.5 times higher, respectively, compared to the pure PDMS-based TENGs. They were further studied in detail to understand the effect of different parameters such as contact-separation frequency and contact force on the TENGs' operation. The stability of the TENG devices was studied, and their potential to be integrated into self-powered smart textiles as power sources was demonstrated.