Study on Grinding-Affected Layer of Outer-Ring Inner Raceway of Tapered Roller Bearing

In the grinding of bearing raceways, the coupling effect between grinding force and heat in the contact area between the grinding wheel and the workpiece causes changes in the material structure and mechanical properties of the raceway surface layer, which can lead to the formation of a grinding-affected layer. The grinding-affected layer has a significant impact on the service performance and fatigue life of bearings. In order to improve the ground surface quality of the outer-ring inner raceway of tapered roller bearings and optimize the processing parameters, this paper presents a study on the grinding-affected layer. A finite element simulation model for grinding the outer-ring inner raceway of the tapered roller bearing was established. The grinding temperature field was simulated to predict the affected-layer thickness during raceway grinding. The correctness of the model was verified through grinding experiments using the current industrial process parameters of bearing raceway grinding. The research results indicate that the highest grinding temperature of the outer-ring inner raceway of the tapered roller bearing is located near the center of the grinding arc area on the thin end edge. As the workpiece speed and grinding depth decrease, the highest grinding temperature decreases, and the dark layer thickness of the grinding-affected layer decreases or even does not occur. The research results can provide theoretical guidance and experimental reference for grinding the raceway of tapered roller bearings.