Related Experiment Video
Updated: Jul 10, 2025

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Stabilization of metal and metalloids from contaminated soils using magnesia-based tundish deskulling waste from
A C Quintero-Payan1, S Huete-Hernández1, V B Aguilar-Pozo2
1Department de Ciència de Materials i Química Física, Universitat de Barcelona, 08028, Barcelona, Spain.
Abstract:
This study presents a groundbreaking exploration into the potential use of refractory tundish deskulling waste (TUN), a magnesium oxide-based by-product from continuous steel casting, as a stabilizing agent for remediating metal and metalloids contaminated soils. Up-flow column horizontal percolation tests were conducted to measure the concentrations of metals and metalloids, pH, and electrical conductivity (EC) in the leachates of two different combinations of contaminated soil and stabilizer (95-5 wt% and 90-10 wt%). The effectiveness of TUN as a soil-stabilizing agent for contaminated soils with metals and metalloids was evaluated by comparing its leachates with those obtained from a sample of a well-established low-grade magnesium oxide (LG-MgO) by-product, which underwent the same testing procedure. The findings revealed a significant correlation between the mobility of the examined metals and metalloids, and the water-soluble or acid phase of the contaminated soil, primarily governed by precipitation-solution reactions. While the stabilizing impact on non-pH-dependent metals, particularly redox-sensitive oxyanions, was less pronounced, both MgO-based stabilizers exhibited a favourable influence on soil pH-dependent metals and metalloids. They achieved this by establishing an optimal pH range of approximately 9.0-10.5, wherein the solubility of metal (hydr)oxides is minimized. Notably, metals like Zn and Cu, which have high leaching potential, experienced a remarkable reduction in leaching - Zn by over 99% and Cu by around 97% - regardless of the stabilizer content. In a broader context, this research champions the principles of the circular economy by offering a technical remedy for treating soils contaminated with pH-dependent metals and metalloids. The proposed solution harnesses industrial waste - currently relegated to landfills - as a resource, aligning with sustainable practices and environmental responsibility.
More Related Videos
11:50Metal-silicate Partitioning at High Pressure and Temperature: Experimental Methods and a Protocol to Suppress Highly Siderophile Element Inclusions
Published on: June 13, 2015
14:51An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature
Published on: September 23, 2018
Related Concept Videos
Corrosion of Reinforcement
However, over time and under certain conditions like carbonation, chloride ingress, and cracking this protective state can be compromised. Steel has areas with...
Steel Manufacturing
During this smelting process, limestone plays a crucial role by forming slag. Slag captures impurities within the molten iron, such...
Washing, Drying, and Ignition of Precipitates
Extraction: Advanced Methods
Masking and Demasking Agents
There are many masking agents, such as cyanide, fluoride, triethanolamine, thiourea, and 2,3-bis(sulfanyl)propan-1-ol (formerly 2,3-dimercapto-1-propanol), with the masking agent chosen based on...
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...