Related Experiment Video
Updated: Jul 9, 2025

Twin-Screw Extrusion Process to Produce Renewable Fiberboards
Published on: January 27, 2021
Circular utilization of discarded oyster farming bamboo scaffolding in pulp and papermaking
Hao-Chen Sun1, Yu-Hsun Lai1, Kuan-Yeh Huang2
1Department of Forestry, National Chung Hsing University, Taichung, 40227, Taiwan, ROC.
Abstract:
Oyster Farming is one of important fisheries and aquaculture industries in Taiwan. Each year, approximately 4000-5000 tons of discarded bamboo scaffolding (BS) used in oyster farming, are generated, so the treatment and utilization of BS should be taken seriously. This study evaluates the suitability of BS for pulp and papermaking by assessing the chemical compositions, microstructural, and fiber morphology. The pulping properties is investigated by soda pulping. The chemical composition of BS shows the potential for application in pulping. The BS microstructure shows that can enhance pulping reactions, while the fiber morphology indicates the possibility of producing high-strength paper. Through the pulping experiment, it demonstrated that BS is suitable for pulping with lower NaOH dosage and longer digestion time. The condition at 170 °C with 14% NaOH dosage for 90 min digestion has the highest yield. After refining the highest pulping yield BS pulp, it can improve the handsheet strength and bulk of the OCC-BS mixed pulp, which can achieve the strength property required for industrial paper. In summary, BS exhibits the potential for pulping application and produces a better paper strength than OCC pulp, exhibiting the feasibility of enhancing the circular utilization value of BS in Taiwan.
Related Concept Videos
Wood Products
Glue-laminated wood, often referred to as glulam, combines multiple smaller pieces of dimensional lumber using adhesives to form a single, larger piece. Cross-laminated timber consists...
Wood Panel Products
Lumber
Initially, the surfaces of these lumber pieces are rough, and their dimensions may vary slightly from one end to...
Introduction to Wood
The structural integrity of the...
Wood Surfacing
The equipment used in the surfacing process is a plane equipped with rotating blades. This tool efficiently smoothens the wood surface and can...

