Remediation of PFAS-impacted soils using magnetic activated carbon (MAC) and hydrothermal alkaline treatment (HALT)

Per- and polyfluoroalkyl substances (PFAS) are a group of synthetic pollutants that are bioaccumulative, toxic, and persistent. One long-term source for PFAS release is PFAS-contaminated soil. Addition of activated carbon (AC) to soil has shown the potential to immobilize PFAS and reduce PFAS bioavailability, but PFAS-loaded spent AC remaining in the treated soil could lead to remobilization. Here we report a novel approach to address this challenge. By applying magnetic activated carbon (MAC) to remediate PFAS-impacted soil, the PFAS-loaded MAC can be retrieved from the treated soil and sorbed PFAS in the spent MAC can be destroyed using hydrothermal alkaline treatment (HALT). Effective MAC recovery was observed when water/soil ratios (w/w) were either <0.07 or > 1. Soil organic content and pH affected PFAS adsorption by the MAC added to soil. After three months of incubation with MAC, high PFAS removals [PFOS (87.6 %), PFOA (83.8 %), and 6:2 FTSA (81.5 %)] were observed for acidic environmental sandy soils with low organic content. In contrast, PFAS removal by MAC was poor for garden soils with high organic matter content. MAC was also used to remediate aqueous film-forming foam (AFFF)-impacted and PFAS-contaminated aged soils with varying PFAS removal performance. HALT technology was able to destroy and defluorinate PFAS adsorbed to the spent MAC. Additionally, the HALT-treated MAC retained its magnetic properties and PFOS sorption capacity, suggesting the potential reusability of HALT-treated MAC. Considering the low energy footprint of HALT compared to conventional PFAS thermal destruction techniques, the combination of MAC and HALT could be a promising treatment train for PFAS-contaminated soils.