Effect of Mass Fraction on Leaching Kinetics of Hydrophobic Ultraviolet Stabilizers in Low-Density Polyethylene

The leaching kinetics of five hydrophobic ultraviolet (UV) stabilizers from low-density polyethylene (LDPE) (micro)fibers into water was evaluated in this study, with variation of the mass fraction (ω = 0.1-2.0 wt %) of the stabilizers. A one-dimensional convection-diffusion model for a cylindrical geometry, requiring partitioning between the LDPE fibers and water (K_LDPEw) and the internal diffusion coefficients (D_LDPE), was used to evaluate the leaching process and the leaching half-life of the target UV stabilizers at ω < 0.5 wt % (Case I). Diffusion through the aqueous boundary layer is the rate-determining step, and the leaching half-life is predicted to be very long (a few months to years) under unaffected conditions. When the UV stabilizers are supersaturated within LDPE fibers (i.e., ω > 0.5 wt %, Case II), the possible formation of a surficial crystal layer of the additives on the LDPE fiber extends the time scale for leaching compared to that in Case I due to the requirement of overcoming the crystallization energy. This study provides a fundamental understanding of the leaching profiles of plastic additives for assessing their potential chemical risks in aquatic environments; further studies under the relevant environmental conditions are required.