Novel PFAS-specific monitoring approach for highly impacted surface waters

In regulatory environmental monitoring programs, only a very small fraction of the vast number of per- and polyfluoroalkyl substances (PFAS) are investigated by target analysis. Therefore, non-target analysis (NTA) studies are increasingly conducted to detect unknown or unnoticed PFAS. These studies are often based on a few grab samples. Thus, discontinuously emitted PFAS from industrial batch processes might be easily overlooked. To address this deficiency and obtain in-depth information on the occurrence and temporal trend of PFAS in surface water impacted by treated industrial waste water, a comprehensive target and NTA study was implemented for 29 months. Elevated PFAS concentrations with up to 10.8 μg L^-1 were detected in the river water by target analysis. In addition to PFAS target analysis, the water samples were analyzed by liquid chromatography-high-resolution tandem mass spectrometry (LC-HRMS/MS). Data processing strategies and various filtering steps were applied to prioritize PFAS. Substances were identified by comparing data to available internal and external PFAS suspect lists, a fragment ion and neutral loss list, and spectral libraries. Several compounds were unequivocally identified based on reference standards. Fifty-five PFAS were (tentatively) identified using NTA. Of those, 43 could be assigned to 13 different homologous series. Partly fluorinated short-chain carboxylic acids (H-PFCA) and sulfonic acids (H-PFSA) were predominantly found in addition to perfluoroalkyl carboxylic acids (PFCA) and the alkyl ether carboxylic acid DONA. To the best of our knowledge, 12 PFAS were reported in surface water for the first time. Signal intensities of individual PFAS and signal ratios varied widely over time, which may indicate batch operations leading to discontinuous emission. Results and insights from this screening approach on PFAS can be used to optimize forthcoming surface water monitoring programs by including newly identified PFAS and selecting appropriate sampling intervals.