Novel Monthly Quality Assurance Regimen and 5-Year Analysis Using a Proton Metrology System

To develop a novel, monthly quality assurance (QA) regimen for a proton therapy system that uses 2 custom phantoms, each housing a commercial scintillator detector and a charge-coupled device camera. The novel metrology system assessed QA trends at a pediatric proton therapy center from 2018 to 2022.

The measurement system was designed to accommodate horizontal and vertical positioning of the commercial device and to enable gantry and couch isocentricity measurements (using a star shot procedure), proton spot profile verification, and imaging and radiation congruence tests to be performed simultaneously in the dual-phantom setup. Gantry angles and proton beam energies were varied and alternated each month, using gantry angles of 0°, 30°, 60°, 90°, 120°, 150°, and 180° and discrete beam energies of 69.4, 84.5, 100, 139.1, 180.4, 200.4, and 221.3 MeV after radiographic verification. A total of 1176 individual monthly QA measurements of gantry and couch isocentricity, spot size, and congruence were analyzed.

Gantry and couch star shot measurements showed beam isocentricities of 0.3 ± 0.2 mm and 0.2 ± 0.2 mm, respectively, which were within the threshold of 1.0 mm. Spot sizes for each discrete energy were within the threshold of ± 10% of the baseline values for all 3 proton rooms. The imaging and radiation coincidence test results for the 1176 individual monthly QA measurements were 0.5 mm for the 50^th percentile and 1.2 mm (the clinical threshold) for the 97.6^th percentile.

Integrating a commercial device with custom phantoms improved the quality of proton system checks compared with previous methods using radiochromic films, loose ball bearings, and foam. The scheme of alternating beam angles with discrete energies in the monthly QA-enabled, clinically meaningful verification of beam energy and gantry angle combinations while the machine performance and accuracy were being checked.