Effect of Hydrogel-based Model Fibrosis on Electrical Properties of Bioelectrodes

Fibrous tissue encapsulation can impact the performance of bioelectrodes following implantation. For example, significant increases in electrode impedance can occur within four weeks post-implantation. A key limitation hindering the understanding of host response-mediated impedance change is the reliance on animal models or complex in vitro cell cultures for electrode testing. This study aimed to develop an in vitro acellular model that can reproduce the changes in electrical properties of bioelectrodes that occur due to host responses following implantation. Specifically, the effect of synthetic, biological, and bio-synthetic co-polymer hydrogel coatings on electrode impedance was measured. Poly(vinyl alcohol) (PVA), gelatin, and PVA-gelatin co-polymers (10 and 20 wt%) were coated onto platinum (Pt) electrodes. Polarisation and access voltage, key components of the voltage response that relate to cell adhesion and protein adsorption respectively, were measured pre and post hydrogel coating and the impedance change was calculated. Results showed that increasing the polymer concentration affects the access resistance regardless of the hydrogel chemistry but only high content gelatin hydrogels increased the polarisation resistance. The increase in total impedance was ~ 2-fold of bare Pt, similar to clinical observations. This study demonstrated that an acellular fibrosis model using hydrogels could reproduce the impedance changes observed in vivo. Such a model system will support research to better understand in vivo changes in electrical properties and the longer term function of neuroprosthetic electrodes.Clinical Relevance-This study proposes an acellular fibrosis model for preclinical research. This will support the design of improved clinical stimulation strategies and better understanding of the mechanisms of impedance change at the device-tissue interface.