Related Experiment Video
Updated: Jul 8, 2025

Advanced Self-Healing Asphalt Reinforced by Graphene Structures: An Atomistic Insight
Published on: May 31, 2022
Polymer Additives with Gas Barrier and Anti-Aging Properties Made from Asphaltenes via Supercritical Ethanol
Zulin Wu1, Xiangbo Liu1, Chao Ma1
1State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, 28 West Xianning Road, Xi'an, Shaanxi, 710049, China.
Abstract:
Asphaltene is often regarded as an undesirable by-product of petroleum processing, possesses vast reserves with little market value. The typical routes of consuming asphaltene, namely burning and landfilling, pose significant environmental challenges. In this study, low-value asphaltene is converted into high-value ethylated carbon clusters (ECC) using a supercritical ethanol technique. The resulting ECC powder demonstrates promising properties for high density polyethylene (HDPE) composite applications. The effects of incorporating ECC on the mechanical, gas barrier, and anti-aging properties of the composite are investigated. Results show that a 1 wt.% ECC led to a 4.2% and 43.5% increase in tensile strength and elongation at break, a reduction of 45.8% and 30.7% in oxygen and carbon dioxide permeability. Furthermore, ECC exhibits effective UV spectrum absorption and conversion in the wavelength range of 400-600 nm, providing protection against UV spectrum damage to HDPE. The incorporation of ECC not only enhances the properties of polymer composites but also sequesters carbon within the polymer matrix, enabling the valorization of asphaltene while mitigating environmental impact.
Related Concept Videos
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Free-Radical Chain Reaction and Polymerization of Alkenes
Olefin Metathesis Polymerization: Overview
Ruthenium-based Grubbs catalyst is the most commonly used catalyst for olefin metathesis polymerization. Grubbs catalyst consists...
Ziegler–Natta Chain-Growth Polymerization: Overview
Additives and Fillers in Concrete
The...
Olefin Metathesis Polymerization: Acyclic Diene Metathesis (ADMET)
Similar to cross-metathesis, ADMET also involves the formation of metallacyclobutane intermediate by [2+2] cycloaddition of one of the double bonds of a terminal diene with...

