Nanomaterial grafted polymorphous activated carbon cloth surface for antibacterial, capacitive deionization and oil...

This work reports the development of multifunctional or polymorphous surfaces using zinc oxide (ZnO) nanorods, silica (SiO₂), and fluoropolymer functionalization in a sequential process. Firstly, zinc oxide nanorods were grown on activated carbon cloth (ACC) using a simple low-temperature synthesis process. ZnO nanorods-coated ACC substrate was applied to investigate the antimicrobial properties, and the results showed inhibition of 50% for Escherichia coli (E.coli) and 55% for Bacillus subtilis (B.subtilis) over 48 h of incubation time. Subsequent in-situ modification of silica nanoparticles like layer on ZnO nanorods-coated ACC surface was developed and used as an electrode for brackish water desalination in a capacitive deionization system. ZnO-SiO₂ modified ACC surface enhanced the desalination efficiency by 1.6 times, the salt removal rate (SRR) by threefold, and the durability (fouling prevention) for long-term usage compared to pristine ACC. Further modification of the ZnO-SiO₂-ACC surface using fluoropolymer rendered the surface superhydrophobic and oleophilic. Vegetable (1.4 g/g) and crude oil (1.6 g/g) adsorption capacities were achieved for modified surface which was 70% enhancement compared with pristine ACC. The dynamic oil spill adsorption test exhibited the complete removal of oil spills on water surfaces within a few seconds, suggesting a potential application in oil spill cleaning.