Effect of Water Adsorption on Lubricating Film Stability in Slippery Coatings

The absorption of water by slippery coatings is a ubiquitous phenomenon that arises due to small but finite water dissolution during the contact of aqueous media with lubricants. In this study, using the concept of surface forces, we have analyzed the influence of trace amounts of water in lubricants on the stability of slippery coatings for both coatings with hydrophilic porous bases, prone to form hydrogen bonds with water, and those with hydrophobic porous bases. To perform such analysis, we have considered for the first time the electrostatic problem of the distribution of the electric potential and electric field strength in stratified films that contain two thin dielectric layers imitating the lubricant and a hydrophobic layer sandwiched between the porous substrate and air or water. Based on the developed approach, the equations for the calculation of the excess free energy and the disjoining pressure, associated with water dissolution in the lubricant film, were derived. An analysis of the excess film energy and the contribution of the image interaction to the disjoining pressure isotherm indicates that the dissolved water can both stabilize and destabilize the oil film, depending on the ratio of the static and dynamic dielectric permittivities of the lubricant and the phases confining the film. The results of calculations and simple experiments carried out here indicate much better water contact stability of silicone films impregnating a hydrophobized porous substrate than films impregnating a hydrophilic porous substrate. The obtained results indicate the preference for using the hydrophobic bases for the fabrication of long-lived slippery coatings characterized by better preservation of slippery functional properties under conditions of lubricant depletion and prolonged contact with water.