Fabrication of a large computer-generated hologram with high diffraction efficiency and high accuracy by scanning...

The diffraction efficiency, defined as the ratio of diffracted power to incident power, is one of the key working indicators for a computer-generated hologram (CGH). The CGH with high diffraction efficiency could suppress stray light and eliminate ghost images, thus improving interferometric performance in aspherical testing of low-reflectivity or large off-axis distance surfaces. However, the high-efficiency CGH is hard to precisely fabricate by traditional reactive ion etching and focusing ion beam, because it requires high etching depth with a high uniformity and sub-nanometric roughness in the glass, especially in the fabrication of a large CGH with an aperture of up to 300 mm. In this study, fabrication of the above-mentioned CGH was demonstrated via what we believe to be a new method called scanning homogenization etching (SHE), in which the ion source with a Gaussian energy distribution accurately scans the glass surface to realize homogenization etching. Different from controlling dwell time at each etching point, this paper proposes to control the scanning rate to achieve not only uniform but also quantitative depth removal in a single scan. Moreover, the depth errors in deep etching across the whole glass surface can be remarkably reduced due to homogenization effects introduced by multiple scanning etching. Finally, the target etching depth of 692.3 nm with an etching uniformity of 2.2% in the etching of a 300 mm CGH was achieved. The roughness of the etched and unetched area both have Ra values of 0.3 nm. The diffraction efficiency of working order is 39.998%, achieving 98.6% of the theoretical diffraction efficiency. In addition, the SHE is not limited by the aperture of the ion source, so it can achieve even larger diffractive optical elements with high diffraction efficiency and high accuracy.