In-situtemperature-dependent sheet resistance study of Cu films in oxygen ambient for heterogeneous integrations

Controlling and preventing Cu oxidation is crucial for improving the performance and reliability of Cu-Cu bonding. Ni-B films were selectively deposited on Cu films to block the Cu oxidation. The resistivity changes of the Cu films in N₂and O₂ambient were measured by using a four-point probe in thein situtemperature-dependent resistance measurements at the temperature from room temperature to 400 °C. The resistivity changes of the 100 nm thick Cu films without Ni-B increased rapidly at a higher temperature (284 °C) in the O₂ambiance. The change of resistivity-increase of 100 nm thick Cu with ∼50 nm thick Ni-B (top) film was lower than the Cu films without Ni-B films due to the blocking diffusion of O₂atoms by the Ni-B films. The resistivity-change and oxidation barrier properties were studied using scanning electron microscopy, FIB, transmission electron microscopy, EDX, and secondary ion mass spectroscopy tools. The proposed article will be helpful for the upcoming advancement in Cu-Cu bonding using selected-area deposition.