Related Experiment Video
Updated: Jul 5, 2025

Experimental Investigation of the Hierarchical Control in DC Microgrids Using a Real-time Simulator
Published on: February 14, 2025
Small-Signal Stability Analysis and MOSMA-Based Optimization Control Strategy of OWF with MMC-HVDC Grid Connection
Jie Zheng1,2, Hui Li1, Bo Zhang1
1State Key Laboratory of Power Transmission Equipment and System Security and New Technology, School of Electrical Engineering, Chongqing University, Chongqing 400044, China.
Abstract:
The recent oscillation events in offshore wind farms (OWFs) connected via a modular multilevel-converter-based HVDC (MMC-HVDC) system are developing towards a wider frequency band, which causes complex a small-signal interaction phenomenon and difficulties in the stability analysis and control. In this paper, the wideband dynamic interaction mechanism is investigated based on the impedance analysis method and an improved control strategy using an optimization algorithm is proposed to improve the small-signal stability and reduce the oscillation risks. First, the detailed impedance models of the grid-connected system are established considering the distribution characteristics of the submarine cable, control delay and frequency coupling effect. Then, combined with the active damping control method, the wideband resonance mechanism is analyzed, and the stability constraints of controller parameters are obtained using the impedance stability criterion. Finally, an improved multi-objective slime mold algorithm (MOSMA)-based coordinated optimization control strategy is proposed to enhance the adaptability of the controller parameters and the wideband damping ability of a grid-connected system, which can improve the wideband stability of the system. The simulation and experimental results verify the proposed control strategy.
Related Concept Videos
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Turbine-Governor Control
Load-frequency control
Generator Voltage Control
Wind Turbine Machine Models
Induction machines interact through the rotating magnetic field generated by the stator and the rotor. The key parameter is slip, which is the difference between synchronous speed and rotor speed relative to synchronous speed. Slip is...
Control of Power Flow

