Stabilization of heavy metals in municipal solid waste incineration fly ash using organic chelating agents: Insight...

Landfill treatment of municipal solid waste incineration fly ash (MSWI FA) after stabilization is the primary disposal technology. However, only few studies have assessed the stability of MSWI-FA-chelated products in different landfill scenarios. In this study, three commonly used dithiocarbamate (DTC)-based organic chelating agents (CAs) (TS-300, SDD, and PD) were selected to stabilize heavy metals (HMs) in MSWI FA. In addition, the leaching toxicity and environmental risks of the chelated products were assessed in different disposal environments. The results demonstrate that the HM leaching concentrations of the chelated products met the concentration limits of the sanitary landfill standard (GB16889-2008; mixed Landfill Scenario) for the three CAs at a low additive level (0.3 %). However, in the compartmentalized landfill scenario (the leaching agent was acid rain), the leaching of HMs from the chelated products met the standard when TS-300, SDD, and PD were added at 1.5 %, 6.0 %, and 8.0 %, respectively. Additionally, Pb, Zn, and Cd in the chelated products from the 1.5 %-TS-300 and 6.0 %-SDD groups met the leaching limits within the pH ranges 6-12 and 7-12, 6-12 and 7-12, and 8-12 and 8-12, respectively. This was primarily due of TS-300's multiple DTC groups forming stable chain-like macromolecular chelates with Pb. However, although the environmental risks associated with Pb, Zn, and Cd in the initial (0-d) chelated products of the 1.5 %-TS-300 and 6.0 %-SDD groups were minimized to low and negligible levels, there was a significant increase in the leaching of the three HMs after 28 d of storage. Therefore, with appropriate CA addition, although the leaching concentration of HMs in the chelated product may comply with the GB16889-2008 standards, it remains essential to consider its environmental risk, particularly in highly acidic or alkaline environments and during prolonged storage of the product.