Related Experiment Video
Updated: Jul 5, 2025

Silicon Metal-oxide-semiconductor Quantum Dots for Single-electron Pumping
Published on: June 3, 2015
Analysis of Lanthanum Oxide Based Double-Gate SOI MOSFET using Monte-Carlo Process
Pattunnarajam Paramasivam1, Naveenbalaji Gowthaman2, Viranjay M Srivastava2,3
1Department of Electronics and Communication Engineering, Prince Shri Venkateshwara Padmavathy Engineering College, Chennai, 600127, India.
Introduction:
This work proposes a Double-Gate (DG) MOSFET with a Single Material made of Silicon On-Insulator (SOI). The Lanthanum Oxide material with a high k-dielectric constant has been used as an interface between two gates and the channel. The Monte Carlo analysis has been used to determine the Conduction Band Energy (Ec) profiles and electron sheet carrier densities (ns) for a Silicon channel thickness (tsi) of 10 nm at 0.5 V gate drain-source voltages. The transverse electric fields are weak at the midchannel of DG SOI MOSFETs, where quantum effects are encountered. The Monte Carlo simulation has been confirmed to be effective for high-energy transport. A particle description reproduces the granularity property of the transport for nanoscale modeling.
Methods:
This work utilizes a Monte Carlo (MC) Simulation for the proposed Double Gate Single Material Silicon On Insulator MOSFET with (La2O3=2 nm) as dielectric oxide on upper and lower gate material. The electrical properties of the DG SOI MOSFETs with Lanthanum Oxide were analyzed using Monte Carlo simulation, including the conduction band energy, electric field, potential distribution, particle movement, and average velocity.
Results:
The peak electric field (E) simulation results and an average drift velocity (υavg) of 6x105 V/cm and 1.6x107 cm/s were obtained, respectively. The conduction band energy for the operating region of the source has been observed to be 4% to the drain side, which obtained a value of -0.04 eV at the terminal end.
Conclusion:
This proposed patent design, such as double-gate SOI-based devices, is the best suggestion for significant scalability challenges. Emerging technologies reach the typical DG SOI MOSFET's threshold performance when their geometrical dimensions are in the nanometer region. This device based on nanomaterial compounds has been more submissive than conventional devices. The nanomaterials usage in the design is more suitable for downscaling and reducing packaging density.
Related Concept Videos
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Small-Signal Analysis of MOSFET Amplifiers

