Impact of Stoma Baseplate Convexity on Tension and Compression Around the Stoma Site: A Finite Element Analysis

For patients living with intestinal or urinary stomas, skin barriers play an essential role in protecting the peristomal skin and preventing peristomal complications. Convex baseplates press into the peristomal skin and are suitable for retracted stomas that do not protrude, peristomal skin with creases, folds, or dips, and stomas where frequent leaking can occur with flat pouching systems. However, there is a lack of data on the magnitude and location of tension applied to the abdomen by convex baseplates. We evaluated the impact of a range of convex baseplates applied to a simulated stoma site. A comparative finite element analysis investigation was conducted to evaluate the impact of eight different convex stoma system baseplates applied to an idealised flat abdomen, representing skin, subcutaneous tissue, and musculature layers. The baseplates considered had varying convexity with depths of 3.5 mm and 7 mm and internal structural diameters between ~30 mm and ~60 mm. The convex product range provided tension in the skin (maximum principal strain) and compression through the fat layer (minimum principal strain). Large differences in the locations and magnitudes of skin tension and fat layer compression were seen between the baseplates under analysis, with both the depth and diameter of convexity influencing the strain experienced across the abdominal topography. The results generated highlight the importance of having an appropriate range of convexity products available and selecting an appropriate option for use based on the stoma type and condition of the peristomal skin.