Fast Fourier ptychographic quantitative phase microscopy for in vitro label-free imaging

Quantitative phase microscopy (QPM) is indispensable in biomedical research due to its advantages in unlabeled transparent sample thickness quantification and obtaining refractive index information. Fourier ptychographic microscopy (FPM) is among the most promising QPM methods, incorporating multi-angle illumination and iterative phase recovery for high-resolution quantitative phase imaging (QPI) of large cell populations over a wide field of-view (FOV) in a single pass. However, FPM is limited by data redundancy and sequential acquisition strategies, resulting in low imaging efficiency, which in turn limits its real-time application in in vitro label-free imaging. Here, we report a fast QPM based on Fourier ptychography (FQP-FPM), which uses an optimized annular downsampling and parallel acquisition strategy to minimize the amount of data required in the front end and reduce the iteration time of the back-end algorithm (3.3% and 4.4% of conventional FPM, respectively). Theoretical and data redundancy analyses show that FQP-FPM can realize high-throughput quantitative phase reconstruction at thrice the resolution of the coherent diffraction limit by acquiring only ten raw images, providing a precondition for in vitro label-free real-time imaging. The FQP-FPM application was validated for various in vitro label-free live-cell imaging. Cell morphology and subcellular phenomena in different periods were observed with a synthetic aperture of 0.75 NA at a 10× FOV, demonstrating its advantages and application potential for fast high-throughput QPI.