Related Experiment Video
Updated: Jul 5, 2025
Author Spotlight: Design and Evaluation of Au-Electroplated Carbon Fiber Cloth Electrodes for Hydrogen Peroxide Fuel Cells
Published on: October 20, 2023
Boosting the Performance of Low-Platinum Fuel Cells via a Hierarchical and Interconnected Porous Carbon Support
1Science and Technology on Advanced Ceramic Fibers and Composites Laboratory, College of Aerospace Science and Engineering, National University of Defense Technology, 109 De Ya Road, Changsha 410073, Hunan, China.
Abstract:
The design of a low-platinum (Pt) proton-exchange-membrane fuel cell (PEMFC) can reduce its high cost. However, the development of a low-Pt PEMFC is severely hindered by the high oxygen transfer resistance in the catalyst layer. Herein, a carbon with interconnected and hierarchical pores is synthesized as a support for the low-Pt catalyst to lower the oxygen transfer resistance. A H2-air fuel cell assembled by Pt/hierarchical porous carbon shows 1610 mW/cm2 peak power density, 2230 mA/cm2 current density at 0.60 V, and only 18.4 S/m local oxygen transfer resistance with 0.10 mgPt/cm2 Pt loading at the cathode, which far exceeds those of various carbon black supports and commercially used Pt/C catalysts. Both the experimental and simulation results have shown the advancement of hierarchical pores toward the high efficiency of oxygen transportation.
