Enhancing supercapacitor electrochemical performance through acetate-ion intercalation in layered nickel-cobalt...

Enhancing the performance of layered nickel-cobalt double hydroxides (NiCo-LDH) as electrode materials for supercapacitors represents a promising strategy for optimizing energy storage systems. However, the complexity of the preparation method for electrode materials with enhanced electrochemical performance and the inherent defects of nickel-cobalt LDH remain formidable challenges. In this study, we synthesized acetate-ion-intercalated NiCo-LDH (NCLA) through a simple one-step hydrothermal method. The physical and chemical structural properties and supercapacitor characteristics of the as-prepared NCLA were systematically characterized. The results indicated that the introduction of Ac^- engendered a distinctive tetragonal crystal structure in NiCo-LDH, concomitant with a reduced interlayer spacing, thus enhancing structural stability. Electrochemical measurements revealed that NCLA-8 exhibited a specific capacitance of 1032.2 F g^-1 at a current density of 1 A g^-1 and a high specific capacitance of 922 F g^-1 at 10 A g^-1, demonstrating a rate performance of 89.3%. Furthermore, NCLA-8 was used to construct the positive electrode of an asymmetric supercapacitor, while the negative electrode was composed of activated carbon. This configuration resulted in an energy density of 67.7 Wh kg^-1 at a power density of 800 W kg^-1. Remarkably, the asymmetric supercapacitor retained 82.8% of its initial capacitance following 3000 charge-discharge cycles at a current density of 10 A g^-1. Thus, this study demonstrates the efficacy of acetate-ion intercalation in enhancing the electrochemical performance of NiCo-LDH, establishing it as a viable electrode material for supercapacitors.