Biochar production under different pyrolysis temperatures with different types of agricultural wastes

The main aim of this study is to determine the physical and chemical properties of biochar synthesized from different materials (straw rice, sawdust, sugar cane, and tree leaves) at different pyrolysis temperatures (400, 600, and 800 °C). The physical and chemical properties such as moisture content, water holding capacity, bulk density, and porosity; and pH, electrical conductivity (EC), organic matter, organic carbon, total nitrogen, potassium, phosphorus, calcium, magnesium, sodium, and sulfur were determined, respectively. The results show that the biochar yield decreased with increasing pyrolysis temperature, and the values of the analyzed properties varied depending on the type of biochar and pyrolysis temperature. The moisture content ranged from 1.11 to 4.18%, and the water holding capacity ranged from 12.9 to 27.6 g water g^-1 dry sample. The highest value of bulk density (211.9 kg m^-3) was obtained from sawdust at a pyrolysis temperature of 800 °C. The porosity values ranged from 45.9 to 63.7%. The highest values of pH and EC (10.4 and 3.46 dS m^-1) were obtained from tree leaves at a pyrolysis temperature of 800 °C. Total organic matter ranged from 66.0 to 98.1%, total organic carbon ranged from 38.3 to 56.9%, and total nitrogen ranged from 0.4 to 1.9%. The highest values of phosphorus and calcium content (134.6 and 649.0 mg kg^-1) were obtained from sugar cane at a pyrolysis temperature of 800 °C. The magnesium, sodium and sulfur content had ranges of 10.9-51.7, 1124-1703 and 3568-12,060 mg kg^-1, respectively.