Optimization of parameters for a fringe projection measurement system by use of an improved differential evolution...

Fringe projection 3D measurement is widely used for object surface reconstruction. While improving measurement accuracy is a crucial task. Measurement accuracy is profoundly affected by various optical structural parameters. However, the current practice of system construction lacks theoretical guidelines and often relies on the experience of the operator, inevitably leading to unpredictable error. This paper investigates a theoretical optimization model and proposes an automatic optimization method for qualitatively determining the multiple optimal optical structural parameters in fringe projection measurement system. The aim is to enhance measurement accuracy conducting a rational comprehensive optimal structural parameters design prior to the system construction. Firstly, the mathematical model of the measurement system is established based on the principle of optical triangulation, and the phase sensitivity criterion is defined as the optimization norm. Within the full measurement range, the optimization merit function is formulated by combing three positions: the center position, the left and right boundary of the CCD. The imaging effectiveness criteria and sensor geometric dimensions are taken into account as the constraint boundaries. Subsequently, a combined improved differential evolution and Levy flight optimization algorithm is applied to search for the optimal parameters. The optimal structural parameters of the system were designed based on the optimization process. Experimental results validated the improvement in measurement accuracy achieved by the optimized structural parameters.