Physicochemical Characteristics of Porous Starch Obtained by Combined Physical and Enzymatic Methods, Part 1:...

Porous starch can be applied as an adsorbent and encapsulant for bioactive substances in the food and pharmaceutical industries. By using appropriate modification methods (chemical, physical, enzymatic, or mixed), it is possible to create pores on the surface of the starch granules without disturbing their integrity. This paper aimed to analyze the possibility of obtaining a porous structure for native corn, potato, and pea starches using a combination of ultrasound, enzymatic digestion, and freeze-drying methods. The starch suspensions (30%, w/w) were treated with ultrasound (20 kHz, 30 min, 20 °C), then dried and hydrolyzed with amyloglucosidase (1000 U/g starch, 50 °C, 24 h, 2% starch suspension). After enzyme digestion, the granules were freeze-dried for 72 h. The structure of the native and modified starches were examined using VIS spectroscopy, SEM, ATR-FTIR, and LTNA (low-temperature nitrogen adsorption). Based on the electrophoretic mobility measurements of the starch granules using a laser Doppler velocimeter, zeta potentials were calculated to determine the surface charge level. Additionally, the selected properties such as the water and oil holding capacities, least gelling concentration (LGC), and paste clarity were determined. The results showed that the corn starch was the most susceptible to the combined modification methods and was therefore best suited for the production of porous starch.