Related Experiment Video
Updated: May 13, 2026
Digital Hybrid Model Preparation for Virtual Planning of Reconstructive Dentoalveolar Surgical Procedures
Published on: August 5, 2021
Proposed Diagnostic Reference Levels in the Missouri/Southern Illinois Region Associated with Cone-beam Computed
Arthur Popkowski1, S Craig Rhodes1, John F Hatton1
1Department of Endodontics, Center for Advanced Dental Education, Saint Louis University, Saint Louis, Missouri.
Introduction:
Diagnostic reference levels (DRLs) are intended to improve patient safety and ensure that patient ionizing radiation doses are as low as reasonably achievable. The purpose of this dosimetry study was to establish regional DRL levels for cone-beam computed tomography (CBCT) imaging for specialty endodontics. Another aim was to compare phantom-measured ionizing radiation dose index 1 (DI1) index doses to the manufacturer-provided dose area product (DAP) radiation output values for each of the CBCT machines studied, to ascertain their degree of correlation. DAP refers to the dose area product, a measure of radiation dose monitoring which represents the dose within the beam times the area within the beam at that position.
Methods:
A thimble ionization chamber and polymethyl methacrylate phantom were used to obtain DI1 values using the SEDENTEXTCT method from 21 different CBCT units. DRLs were calculated based on the 75th percentile (third quartile) of the median output values.
Results:
The proposed DRL from the CBCT units surveyed has a DAP value of 838 mGy cm2 and a DI1 value of 3.924 mGy. DAP versus DI1 values of 500.6 mGy cm2 versus 2.006 mGy, and 838 mGy cm2 versus 3.906 mGy represented the third quartile of the median values for the 4-cm × 4-cm and 5-cm × 5-cm field of views (FOVs), respectively.
Conclusions:
The DI1 and DAP values strongly correlated when 3 outlier CBCT machines (J Morita Veraview X800) using a novel 360° (full rotation) acquisition mode were excluded. The importance of selectable exposure parameters as directly related to ionizing radiation output is illustrated among the CBCT units surveyed. Although the actual FOV that is selected is ultimately dictated by the specific clinical requirements, a 4-cm × 4-cm FOV is recommended for specialist endodontics practice, whenever clinically practical, based on the decreased ionizing radiation output, as compared to that from a 5-cm × 5-cm FOV.
