Related Experiment Video
Updated: Jul 2, 2025

Fabric Moisture Uniform Control to Study the Influence of Air Impingement Parameters on Fabric Drying Characteristics
Published on: August 19, 2019
Fine dust inflow paths and heating load variation based on field measurement of air tightness in two Korean schools
Doo Yong Park1, Seung Hyeon Han1, Duk Joon Park1
1Building Energy Research Center, KCL(Korea Conformity Laboratories), Seoul, 06711, South Korea.
Abstract:
This study aimed to determine the effects of fine dust reduction, as well as the energy load reduction in association with the improvement plans by measuring the airtightness and indoor and outdoor fine dust concentrations in middle and high school classrooms and by identifying the fine dust inflow paths. The air tightness and indoor and outdoor fine dust concentrations were measured at two schools, and the paths of outdoor fine dust inflow were identified for an extensive analysis of the effects of fine dust reduction and the energy load reduction in association with improvement plans. Air tightness in the classroom at school A and B was improved by 32.26% and 38.58% with sealing, respectively. Analyzing the outdoor air inflow paths at school B according to the variation in air tightness, the probability of outdoor air inflow increased in the following order from the highest to the lowest: corridor windows, corridor doors, exterior windows, supply and exhaust units. For the rate of reduction in heating load, the highest rate was shown to be 27% at school A with improved air tightness at the exterior windows and 32% at school B with improved air tightness at the interior doors. This is expected to be reflected in the selection of equipment such as heat pumps and show cost-saving effects such as capacity reduction.
More Related Videos
10:29Experimental Methodology for Estimation of Local Heat Fluxes and Burning Rates in Steady Laminar Boundary Layer Diffusion Flames
Published on: June 1, 2016
13:27Exploring the Effects of Atmospheric Forcings on Evaporation: Experimental Integration of the Atmospheric Boundary Layer and Shallow Subsurface
Published on: June 8, 2015
Related Concept Videos
Conduction, Convection and Radiation: Problem Solving
In order to solve a problem related to heat transfer, first of all, the situation needs to be examined to determine the type of heat transfer involved. This could...
Thermal Insulation in Masonry Walls
External insulation can be applied using an Exterior Insulation and Finish System (EIFS), which involves affixing panels of plastic foam to the wall and covering them with a polymeric stucco reinforced with glass fiber mesh....