Rational design and easy fabrication of transparent photothermal/hygroscopic composite coatings with long-lasting...

Hygroscopic polymers are good candidates for antifogging coatings, but their long-term effectiveness is limited by the equilibrium between water absorption and expansion. As an efficient and environmentally friendly solution, photothermal materials are being introduced into the field of antifogging. However, there is a need for enhancement in the spectral characteristics of most photothermal materials within the visible light region. In addition, photothermal antifogging coatings often exhibit a delay in heating response, which hinders their ability to promptly evaporate condensed water droplets in the absence of illumination or during initial illumination. Here, a bilayer structure design of photothermal nanomaterials/hygroscopic polymers is proposed to achieve long-term antifogging under sunlight activation. Ensuring the rapid absorption of condensed water droplets on the coating surface, while simultaneously achieving efficient photothermal conversion for a swift temperature increase over the entire coating, is key to this approach, which will not only suppress early fogging but also lead to an exponential decrease of the nucleation rate of droplets. During this process, a dynamic equilibrium is gradually established between the condensation and evaporation of fog droplets, leading to long-term antifogging properties. The light transmittance of the composite coatings reaches as high as ca. 75% in the visible light region, making them well suited for a diverse range of transparent substrate and device applications. A clear field of view can be maintained for at least 6 h under 1 sun illumination above 65 °C hot steam. The antifogging/defogging performance is effectively demonstrated even under challenging non-ideal natural conditions, such as low solar irradiation during dusk or when placed indoors behind windows.